Tuesday, July 08, 2008

A Rust Dyeing Visual

Lay out fabric to be rusted most any fabric and surface WILL rust so be sure to protect your work area with a plastic drop cloth!

Arrange rusty objects into a pleasing pattern.

Spritz with vinegar

Cover with plastic 24 hours, the plastic keeps the fabric and rusty areas moist.

Remove plastic to check progress, if desired rewet and cover again for darker richer markings.


Rust Dyeing Q & A

Rust Dyeing Questions and Answers by Kimberly Baxter Packwood © 2001

Q. Can I use salt water instead of vinegar to oxidize the metal?
A. Yes. Vinegar causes metal to oxidize faster than salt water.

Q. What is the fastest way to rust fabric?
A. I place my vinegar wetted fabric into a plastic bag with rusty objects, I then place them in a sunny location that is warm. I will have adequate rust on my fabric in about 24 hours, depending on the level of rust I am seeking.

Q. Will the fabric rust through?
A. It depends on how far you allow the rusting process to proceed. You can rust the fabric to the point that the fabric will develop holes. If you do not want holes immediately then you need to stop the rusting process and neutralize the fabrics.

Q. I rusted my fabric, but I want more rust on the fabric, can I rust my fabric again?
A. Yes. I would neutralize and rinse the fabrics before proceeding with any further rusting applications.

Q. Can I over dye the rusted fabric?
A. Yes. If you are using natural dyes the iron from the rust can act as a mordant, saddening the natural dye colors. An example would be khaki from Osage Orange which gives golden to brassy yellows.

Q. How do I stop the rusting process?
A. You will need to neutralize your fabric with salt water or even soda ash to raise the pH of the fabric. Periodically, at least once a year, you will have to neutralize your fabrics as once the rust has bonded with the fibers it will continue to rust indefinitely.

Q. Is rusted fabric archival?
A. No! You can promote the longevity of your piece by periodically neutralizing the fabrics. However, neutralizing the fabric will not create an archival fabric.

Q. I Rusted my fabric for a quilting project but my needle will not go through the fabric, what am I doing wrong?
A. Try the rusting techniques on a loser weave fabric. The rust, when oxidizing, is to some extent, creating a layer of metal oxide onto the fabric. If your fabric has a tight dense weave this layer of metal oxide is denser as well, making it difficult to needle.

NOTE: If the metal oxide is thick, and chunky, on the fabrics surface I would not recommend using your sewing machine as the oxide particles can cause problems with your machine.

Rust Dyeing an Introduction

Rust Dyeing by Kimberly Baxter Packwood © 2001

`````*````*`````*`````*`````*`````*`````*`````*`````*`````*`````*`````*`````*`````*
AUTHORS NOTE: I wrote this awhile back, it was published in Turkey Red Journal - a well respected professional juried by your peers type journal (sometime around 2002). NOTE that these instructions from my self published book and this previously published article, and my artwork, were then published in Cloth Paper Scissors in 2007, I was NOT given credit for my work or my words. - Kimberly

`````*`````*`````*`````*`````*`````*`````*`````*`````*`````*`````*`````*`````*`````*

Rust dyeing is a surface design method that adds dimension to your fabrics and fibers. I use the technique predominately on cotton or silk fabrics. Natural fibers take the rust colors better than synthetic fibers.

You can rust dye onto commercially dyed and/or printed fabrics. However, fabrics dyed using synthetic dyes, or those dyed with natural dyes take rust dyeing best as they usually do not have anti-stain coatings on them.

When applying rusty objects to naturally dyed fabrics the colors will change. Iron, i.e. rust, is a modifier and is used as a mordant with natural dyes. Modifiers change the existing color via shifts in the pH levels. An example would be hibiscus or cochineal, each yield a red color, when you add iron they shift from red to purple. A minute amount causes this color change.

You can place rusty objects next to wet fabric and acquire rust patterning over time. However, vinegar will speed up the rusting process, it aids in breaking the rust particles free from the object that is rusting. Rusting occurs normally due to oxidation, i.e. contact with the air. Be patient. Rust dyeing with water takes about a week. Using vinegar produces color in less time usually twenty-four hours.

I use straight vinegar and all sorts of rusty objects to acquire my rust dyed patterns. Old nails and wire work well for this technique. Wire can be used for bound resist techniques, especially when wrapping the fabric around a rusty pipe. Or you can simply lay the wire in a loose pattern on the fabric and rust it in that manner.

Pole wrapping and bound resist techniques work well with rust dyeing. Simply wrap your vinegar-saturated fabric around a rusty pole, being careful not to tear the fabric, scrunch and otherwise manipulate the fabric to created patterning.

You can sprinkle iron mordant or iron shavings onto your fabric for other patterning. Iron mordant is preferable to shavings. Shavings are often sharp things that can cut you or the fabric. Metal shavings may be coated in machinery oil which would put unwanted stains onto the fabric.

If you like your rusty pieces and want to push the rust dyeing technique further, rinse the fabric and neutralize it in salt water (correction 2008 use baking soda water instead of salt water), rinse it again and then rust the fabric once more. This will help prevent the fabric from rotting through.

Natural rust is an iron oxide. It comes in about ten or more natural colors depending on what it is in the neighboring the iron ore. Wear gloves and a mask when working with it. Iron in this form wants to bind with your hemoglobin blocking all available sites for oxygen, ask me how I know. You can become gravely ill from too much contact with raw iron products. In addition, tolerance to raw iron varies with each person.

You can mix a small amount natural rust with water, I generally use one teaspoon rust to one cup liquid, or with soy milk to paint fabric. Stir well. Let it sit for 24 hours to ensure that all of the color will dissolve. Then apply the rust solution to the fabric. Use a old brush you can dedicate to this kind of project. Natural bristle brushes work best with this technique allowing the liquid to wick up the bristles and not leave a mess on your fabric. Cure the fabric dry for 24 hours. Rinse and neutralize your fabric in a saltwater solution.

When using the rust technique if you want the process to stop you need to neutralize it with a salt-water solution. Dissolve about 1/4 cup salt into four gallons of hot water. I do this in a five-gallon bucket. Soak your fabric in the salt water about fifteen minutes. Wash the fabric using a non-phosphorous soap or a mild color free shampoo.

I teach workshops on rust dyeing, several workshops on natural dyeing and several for clay/pigment dyeing

- Kimberly